Loading...

Adapter Plate Ducati Multistrada 1200 V4 Pikes Peak 2022 –

288,99 €

incl. 19 % VAT plus shipping costs

Loading...

Description

Adapter Plate for the Original Bursig Stand®

This adapter plate allows you to continue using your original Bursig Stand® when switching to a Ducati Multistrada V4 Pikes Peak (from 2022).

IMPORTANT NOTE

Special straight wheel adapters are required for this model.
These are already included in this set.


Compatible Model

  • Ducati Multistrada 1200 V4 Pikes Peak (from 2022)


Important Installation Information

To install the frame sleeve, the swingarm axle must be unloaded.
If your motorcycle does not have a center stand, installation may be more challenging, as the rear frame must be lifted with a crane or a similar support device to relieve the swingarm axle.


Do you have another Multistrada version?


Do you have a different motorcycle model?

If your bike is one of the following, you will need a different adapter plate:

Ducati 1100 Panigale V4 / S (2018–2025)

Ducati 1000 Panigale V4 R (ab 2019)

Ducati 1100 Streetfighter V4 (ab 2020–2025)

KTM 1290 Super Duke R / RR (2020–2024)

KTM 1290 Super Duke / R (2014–2019)

KTM 1290 Super Duke (2016–2023)

KTM 1290 Super Duke GT (2016 -2023)

KTM 1390 Super Duke (2024)

KTM 1290 Super Adventure (2014–2020)

BMW F900GS (ab 2020)

BMW F900GS Adventure (ab 2020)

BMW F900XR (ab 2019)

BMW R1300GS (2023-2026)

BMW R1300R / RS (2023-2026)

BMW R 1300 GS Adventure (2023-26)

➡ Click here for the correct adapter plate.


None of the above models?

Please use our standard adapter plate.
➡ Click here to go to the standard adapter plate.


Scope of Delivery

  • Complete adapter plate (including upper and lower mounts)

  • Frame sleeve (depending on model)

  • Straight wheel adapters
  • Adjustment sketch including QR code for installation guide


Installation Notes

  • If you experience any installation problems, please contact us immediately.

  • Do not use force during installation.

  • We recommend having the frame sleeve installed by a professional workshop to ensure correct fitting.

  • If you are located nearby, you are welcome to make an appointment — we will install your Bursig Stand® free of charge on site.


Our Service Promise

We want you to be completely satisfied with your Bursig Stand®.
If you would like assistance during installation, our technicians will gladly help you by phone or video call.

Thank you for your trust in our products!

Additional information

Weight 7 kg
Dimensions 29 × 19 × 19 cm

For most models, a QR code is sent with the assembly of the frame sleeve

SKU: AP-MULTIPP Category: