Adapter Plate Ducati Multistrada 1200 V4 2021-

Adapter Plate for the Original Bursig Stand®

This adapter plate allows you to continue using your original Bursig Stand® when switching to a Ducati Multistrada V4.

ATTENTION:

Special straight wheel adapters are required for this model.
These are already included in this set.

Compatible Model:

• Ducati Multistrada 1200 V4 / V4S (2021–2025, 1A00AA)

Important Installation Information

To install the frame sleeve, the swingarm axle must be unloaded.
If your motorcycle does not have a center stand, installation will be slightly more difficult, as the rear frame must be lifted using a crane or a similar lifting device to relieve the swingarm axle.

Do you have another Multistrada version?

• Ducati Multistrada 1200 V4 Pikes Peak (from 2022)
  ➡ Click here for the correct Pikes Peak adapter plate.

Do you have a different motorcycle model?

If you own one of the following models, you will need a different adapter plate:

Ducati 1100 Panigale V4 / S (2018–2025)

Ducati 1000 Panigale V4 R (ab 2019)

Ducati 1100 Streetfighter V4 (ab 2020–2025)

KTM 1290 Super Duke R / RR (2020–2024)

KTM 1290 Super Duke / R (2014–2019)

KTM 1290 Super Duke (2016–2023)

KTM 1290 Super Duke GT (2016 -2023)

KTM 1390 Super Duke (2024)

KTM 1290 Super Adventure (2014–2020)

BMW F900GS (ab 2020)

BMW F900GS Adventure (ab 2020)

BMW F900XR (ab 2019)

BMW R1300GS (2023-2026)

BMW R1300RS (2023-2026)

BMW R 1300 GS Adventure (2023-26)

➡ Click here for the correct adapter plate.

None of the above models?

Please use our standard adapter plate instead.
➡ Click here to go to the standard adapter plate.

Scope of Delivery

• Complete adapter plate (including upper and lower mounts)

• Connector screw (depending on model)

• Frame sleeve (depending on model)

• Straight wheel adapters

• Adjustment sketch including QR code for installation instructions

Installation Notes

• If you have any questions or problems, please contact us immediately.

• Do not use force during installation.

• We recommend having the frame sleeve installed by a professional workshop.

• If you are located nearby, you are welcome to make an appointment — we will install your Bursig Stand® free of charge on site.

Our Service Promise

We want you to be completely satisfied with your Bursig Stand®.
If you would like assistance during installation, our technicians will gladly help you by phone or, if preferred, via video call.

Thank you for your trust in our products!