Adapter Plate Ducati Multistrada 1200 V4 Pikes Peak 2022 –

Adapter Plate for the Original Bursig Stand®

This adapter plate allows you to continue using your original Bursig Stand® when switching to a Ducati Multistrada V4 Pikes Peak (from 2022).

IMPORTANT NOTE

This adapter plate can only be used with straight wheel adapters.

TO THE WHEEL SET

If you do not have these, you can order the wheel set separately.
Please add a note in the comment field of your order stating that you require the straight wheel adapters.

Compatible Model

• Ducati Multistrada 1200 V4 Pikes Peak (from 2022)

Important Installation Information

To install the frame sleeve, the swingarm axle must be unloaded.
If your motorcycle does not have a center stand, installation may be more challenging, as the rear frame must be lifted with a crane or a similar support device to relieve the swingarm axle.

Do you have another Multistrada version?

• Ducati Multistrada 1200 V4 / V4S (2021–2025, 1A00AA)
  ➡ [Click here for the correct adapter plate for the V4 / V4S.]

Do you have a different motorcycle model?

If your bike is one of the following, you will need a different adapter plate:

• Ducati 1100 Panigale V4 / S (2018–2025)

• Ducati 1000 Panigale V4 R (from 2019)

• Ducati 1100 Streetfighter V4 (from 2020–2025)

• KTM 1290 Super Duke R / RR (2020–2024)

• KTM 1290 Super Duke / R (2014–2019)

• KTM 1290 Super Duke (2016–2023)

• KTM 1390 Super Duke (2024)

• KTM 1290 Super Adventure (2014–2020)

• BMW F900GS (from 2020)

• BMW F900GS Adventure (from 2020)

• BMW F900XR (ab 2019)

➡ [Click here for the correct adapter plate.]

None of the above models?

Please use our standard adapter plate.
➡ [Click here to go to the standard adapter plate.]

Scope of Delivery

• Complete adapter plate (including upper and lower mounts)

• Frame sleeve (depending on model)

• Adjustment sketch including QR code for installation guide

Installation Notes

• If you experience any installation problems, please contact us immediately.

• Do not use force during installation.

• We recommend having the frame sleeve installed by a professional workshop to ensure correct fitting.

• If you are located nearby, you are welcome to make an appointment — we will install your Bursig Stand® free of charge on site.

Our Service Promise

We want you to be completely satisfied with your Bursig Stand®.
If you would like assistance during installation, our technicians will gladly help you by phone or video call.

Thank you for your trust in our products!